Metron Profiler for Storm

Deploying Profiles with the Stellar Shell

Continuing the previous running example, at this point, you have seen how your profile behaves against real, live telemetry in a controlled execution environment. The next step is to deploy your profile to the live, actively running Profiler topology.

1. Start the Stellar Shell with the -z command line argument so that a connection to Zookeeper is established. This is required when deploying a new profile definition as shown in the steps below.

   [root@node1 ~]# source /etc/default/metron
   [root@node1 ~]# $METRON_HOME/bin/stellar -z $ZOOKEEPER
   Stellar, Go!
   [Stellar]>>>
   [Stellar]>>> %functions CONFIG CONFIG_GET, CONFIG_PUT
   

2. If you haven’t already, define your profile.

   [Stellar]>>> conf := SHELL_EDIT()
   [Stellar]>>> conf
   {
     "profiles": [
       {
         "profile": "hello-world",
         "onlyif":  "exists(ip_src_addr)",
         "foreach": "ip_src_addr",
         "init":    { "count": "0" },
         "update":  { "count": "count + 1" },
         "result":  "count"
       }
     ]
   }
   

3. Check what is already deployed.

   Pushing a new profile configuration is destructive. It will overwrite any existing configuration. Check what you have out there. Manually merge the existing configuration with your new profile definition.

   [Stellar]>>> existing := CONFIG_GET("PROFILER")
   

4. Deploy your profile. This will push the configuration to to the live, actively running Profiler topology. This will overwrite any existing profile definitions.

   [Stellar]>>> CONFIG_PUT("PROFILER", conf)
   

Deploying Profiles from the Command Line

1. Create the profile definition in a file located at $METRON_HOME/config/zookeeper/profiler.json. This file will likely not exist, if you have never created Profiles before.

   The following example will create a profile that simply counts the number of messages per ip_src_addr.

   {
     "profiles": [
       {
         "profile": "hello-world",
         "onlyif":  "exists(ip_src_addr)",
         "foreach": "ip_src_addr",
         "init":    { "count": "0" },
         "update":  { "count": "count + 1" },
         "result":  "count"
       }
     ]
   }
   

2. Upload the profile definition to Zookeeper.

   $ source /etc/default/metron
   $ cd $METRON_HOME
   $ bin/zk_load_configs.sh -m PUSH -i config/zookeeper/ -z $ZOOKEEPER
   

   You can validate this by reading back the Metron configuration from Zookeeper using the same script. The result should look-like the following.

   $ bin/zk_load_configs.sh -m DUMP -z $ZOOKEEPER
   ...
   PROFILER Config: profiler
   {
     "profiles": [
       {
         "profile": "hello-world",
         "onlyif":  "exists(ip_src_addr)",
         "foreach": "ip_src_addr",
         "init":    { "count": "0" },
         "update":  { "count": "count + 1" },
         "result":  "count"
       }
     ]
   }
   

3. Ensure that test messages are being sent to the Profiler’s input topic in Kafka. The Profiler will consume messages from the input topic defined in the Profiler’s configuration (see Configuring the Profiler). By default this is the indexing topic.

4. Check the HBase table to validate that the Profiler is writing the profile. Remember that the Profiler is flushing the profile every 15 minutes. You will need to wait at least this long to start seeing profile data in HBase.

   $ /usr/hdp/current/hbase-client/bin/hbase shell
   hbase(main):001:0> count 'profiler'
   

5. Use the Profiler Client to read the profile data. The following PROFILE_GET command will read the data written by the hello-world profile. This assumes that 10.0.0.1 is one of the values for ip_src_addr contained within the telemetry consumed by the Profiler.

   $ source /etc/default/metron
   $ bin/stellar -z $ZOOKEEPER
   [Stellar]>>> PROFILE_GET( "hello-world", "10.0.0.1", PROFILE_FIXED(30, "MINUTES"))
   [451, 448]
   

   This result indicates that over the past 30 minutes, the Profiler stored two values related to the source IP address “10.0.0.1”. In the first 15 minute period, the IP 10.0.0.1 was seen in 451 telemetry messages. In the second 15 minute period, the same IP was seen in 448 telemetry messages.

   It is assumed that the PROFILE_GET client is correctly configured to match the Profile configuration before using it to read that Profile. More information on configuring and using the Profiler client can be found here.

Ambari Installation

The Metron Profiler is installed automatically when installing Metron using the Ambari MPack. You can skip the Installation section and move ahead to Creating Profiles should this be the case.

Manual Installation

This section will describe the steps necessary to manually install the Profiler on an RPM-based Linux distribution. This assumes that core Metron has already been installed and validated. If you installed Metron using the Ambari MPack, then the Profiler has already been installed and you can skip this section.

1. Build the Metron RPMs (see Building the RPMs).

   You may have already built the Metron RPMs when core Metron was installed.

   $ find metron-deployment/ -name "metron-profiler*.rpm"
   metron-deployment//packaging/docker/rpm-docker/RPMS/noarch/metron-profiler-0.4.1-201707131420.noarch.rpm
   

2. Copy the Profiler RPM to the installation host.

   The installation host must be the same host on which core Metron was installed. Depending on how you installed Metron, the Profiler RPM might have already been copied to this host with the other Metron RPMs.

   [root@node1 ~]# find /localrepo/  -name "metron-profiler*.rpm"
   /localrepo/metron-profiler-0.4.1-201707112313.noarch.rpm
   

3. Install the RPM.

   [root@node1 ~]# rpm -ivh metron-profiler-*.noarch.rpm
   Preparing...                ########################################### [100%]
      1:metron-profiler        ########################################### [100%]
   

   [root@node1 ~]# rpm -ql metron-profiler
   /usr/metron
   /usr/metron/0.4.2
   /usr/metron/0.4.2/bin
   /usr/metron/0.4.2/bin/start_profiler_topology.sh
   /usr/metron/0.4.2/config
   /usr/metron/0.4.2/config/profiler.properties
   /usr/metron/0.4.2/flux
   /usr/metron/0.4.2/flux/profiler
   /usr/metron/0.4.2/flux/profiler/remote.yaml
   /usr/metron/0.4.2/lib
   /usr/metron/0.4.2/lib/metron-profiler-0.4.2-uber.jar
   

4. Edit the configuration file located at $METRON_HOME/config/profiler.properties.

   kafka.zk=node1:2181
   kafka.broker=node1:6667
   

   • Change kafka.zk to refer to Zookeeper in your environment.
   • Change kafka.broker to refer to a Kafka Broker in your environment.

5. Create a table within HBase that will store the profile data. By default, the table is named profiler with a column family P. The table name and column family must match the Profiler’s configuration (see Configuring the Profiler).

   $ /usr/hdp/current/hbase-client/bin/hbase shell
   hbase(main):001:0> create 'profiler', 'P'
   

6. Start the Profiler topology.

   $ cd $METRON_HOME
   $ bin/start_profiler_topology.sh
   

At this point the Profiler is running and consuming telemetry messages. We have not defined any profiles yet, so it is not doing anything very useful. The next section walks you through the steps to create your very first “Hello, World!” profile.

profiler.input.topic

Default: indexing

The name of the Kafka topic from which to consume data. By default, the Profiler consumes data from the indexing topic so that it has access to fully enriched telemetry.

profiler.output.topic

Default: enrichments

The name of the Kafka topic to which profile data is written. This property is only applicable to profiles that define the result triage field. This allows Profile data to be selectively triaged like any other source of telemetry in Metron.

profiler.period.duration

Default: 15

The duration of each profile period. This value should be defined along with profiler.period.duration.units.

Important: To read a profile using the Profiler Client, the Profiler Client’s profiler.client.period.duration property must match this value. Otherwise, the Profiler Client will be unable to read the profile data.

profiler.period.duration.units

Default: MINUTES

The units used to specify the profiler.period.duration. This value should be defined along with profiler.period.duration.

Important: To read a profile using the Profiler Client, the Profiler Client’s profiler.client.period.duration.units property must match this value. Otherwise, the Profiler Client will be unable to read the profile data.

profiler.window.duration

Default: 30

The duration of each profile window. Telemetry that arrives within a slice of time is processed within a single window.

Many windows of telemetry will be processed during a single profile period. This does not change the output of the Profiler, it only changes how the Profiler processes data. The window defines how much data the Profiler processes in a single pass.

This value should be defined along with profiler.window.duration.units.

This value must be less than the period duration as defined by profiler.period.duration and profiler.period.duration.units.

profiler.window.duration.units

Default: SECONDS

The units used to specify the profiler.window.duration. This value should be defined along with profiler.window.duration.

profiler.window.lag

Default: 1

The maximum time lag for timestamps. Timestamps cannot arrive out-of-order by more than this amount. This value should be defined along with profiler.window.lag.units.

profiler.window.lag.units

Default: SECONDS

The units used to specify the profiler.window.lag. This value should be defined along with profiler.window.lag.

profiler.workers

Default: 1

The number of worker processes to create for the Profiler topology. This property is useful for performance tuning the Profiler.

profiler.executors

Default: 0

The number of executors to spawn per component for the Profiler topology. This property is useful for performance tuning the Profiler.

profiler.ttl

Default: 30

If a message has not been applied to a Profile in this period of time, the Profile will be terminated and its resources will be cleaned up. This value should be defined along with profiler.ttl.units.

This time-to-live does not affect the persisted Profile data in HBase. It only affects the state stored in memory during the execution of the latest profile period. This state will be deleted if the time-to-live is exceeded.

profiler.ttl.units

Default: MINUTES

The units used to specify the profiler.ttl.

profiler.hbase.salt.divisor

Default: 1000

A salt is prepended to the row key to help prevent hotspotting. This constant is used to generate the salt. This constant should be roughly equal to the number of nodes in the Hbase cluster to ensure even distribution of data.

profiler.hbase.table

Default: profiler

The name of the HBase table that profile data is written to. The Profiler expects that the table exists and is writable. It will not create the table.

profiler.hbase.column.family

Default: P

The column family used to store profile data in HBase.

profiler.hbase.batch

Default: 10

The number of puts that are written to HBase in a single batch.

profiler.hbase.flush.interval.seconds

Default: 30

The maximum number of seconds between batch writes to HBase.

topology.kryo.register

Default:

[ org.apache.metron.profiler.ProfileMeasurement, \
  org.apache.metron.profiler.ProfilePeriod, \
  org.apache.metron.common.configuration.profiler.ProfileResult, \
  org.apache.metron.common.configuration.profiler.ProfileResultExpressions, \
  org.apache.metron.common.configuration.profiler.ProfileTriageExpressions, \
  org.apache.metron.common.configuration.profiler.ProfilerConfig, \
  org.apache.metron.common.configuration.profiler.ProfileConfig, \
  org.json.simple.JSONObject, \
  java.util.LinkedHashMap, \
  org.apache.metron.statistics.OnlineStatisticsProvider ]

Storm will use Kryo serialization for these classes. Kryo serialization is more performant than Java serialization, in most cases.

For these classes, Storm will uses Kryo’s FieldSerializer as defined in the Storm Serialization docs. For all other classes not in this list, Storm defaults to using Java serialization which is slower and not recommended for a production topology.

This value should only need altered if you have defined a profile that results in a non-primitive, user-defined type that is not in this list. If the class is not defined in this list, Java serialization will be used and the class must adhere to Java’s serialization requirements.

The performance of the entire Profiler topology can be negatively impacted if any profile produces results that undergo Java serialization.